To adjust the stainless steel bracelet of GM-B2100

To adjust the stainless steel bracelet of your G-SHOCK GM-B2100, follow this step-by-step guide. This process involves removing or adding links to achieve the desired fit. For a visual demonstration, refer to the video tutorial below.

🛠️ Tools You’ll Need

• Spring bar tool or a small flathead screwdriver
• Push pin or a paperclip
• Small hammer or mallet
• Bracelet holder or a soft cloth to protect the watch
• Tweezers (optional)YouTubeYouTube

🔧 Step-by-Step Bracelet Adjustment

1. Prepare Your Workspace

• Lay the watch face down on a soft cloth to prevent scratches.
• Ensure good lighting and a clean, flat surface.

2. Identify Removable Links

• Examine the inside of the bracelet to locate small arrows on the links. These arrows indicate the direction in which pins should be pushed out.

3. Remove the Necessary Links

• Place the bracelet in the holder or on the cloth with the arrow pointing down.
• Using the push pin or paperclip, press down on the pin in the direction of the arrow.
• Gently tap the tool with the hammer until the pin protrudes from the other side.
• Use tweezers or fingers to pull the pin out completely.
• Repeat this process to remove the desired number of links.

4. Reattach the Bracelet

• Align the remaining bracelet ends.
• Insert a pin into the link hole in the opposite direction of the arrow.
• Tap gently with the hammer until the pin is flush with the bracelet.

5. Check the Fit

• Try on the watch to ensure a comfortable fit.
• If necessary, repeat the process to add or remove additional links.Baillie Gifford Prize

⚠️ Tips and Warnings

• Always remove an equal number of links from both sides of the clasp to maintain symmetry.
• Keep the removed links and pins in a safe place in case you need to readjust in the future.
• If you’re unsure or uncomfortable performing this adjustment, consider seeking assistance from a professional watch technician.